Metasys Multi System Type 1
Amalgam separators are devices designed to remove amalgam waste particles from dental office wastewater. Without an amalgam separator, these particles can be suctioned into the dental unit vacuum line and discharged into the public sewer system.
The effort to reduce amalgam waste discharge from the dental office stems from increasing pressure facing local wastewater treatment plants to reduce the concentration of mercury in effluent from their plants and minimize the concentration of mercury in sludge.
The Multi System Type 1 (MST 1) by METASYS is a two-stage, single-unit amalgam separator with integrated air/water separation and place selection valve. It convinces with technical expertise gained from many years of practical experience.
With its modular construction and separation rate of 98.6 % (according to the German DIN standard) achieved by pre-sedimentation and dynamic separation, the MST 1 is a milestone of modern dental technology in services to the environment. Its integrated self-cleaning function reduces the cost of maintenance to a minimum.
Metasys Compact Dynamic
The space-saving, single-unit amalgam separator COMPACT Dynamic is noted for its high level of reliability and its ease of use and servicing. The dynamic separation process (up to 96.4 %) ensures optimum and reliable function even during the heaviest of strains (foam formation during prophylaxis work, AIR-FLOW® and various surgical procedures).
The up-to-date capacitative sensor technology reliably monitors the filling level externally. This means that the COMPACT Dynamic has no internal submersible probes that require regular cleaning. To properly clean and disinfect the device, all that is needed is to carry out a suction disinfection process using GREEN&CLEAN M2.
Metasys ECO II / ECO II Tandem
The ECO II is straightforward in its construction and works entirely without an electronic control unit, delivering a separation rate of 99.3%. The entire device is replaced after about a year. The ECO II is suitable for anyone looking for an easy-to-maintain, cost-effective alternative to electronically controlled centrifugal systems. The ECO II can serve up to 3 dental units, while the ECO II Tandem can serve 3 to 5 dental units. It is also available as a module for the EXCOM hybrid A1/A2/A5 central semi-wet suction systems.
Metasys Excom Hybrid 1-A1
FLEXIBLE AND INDIVIDUAL AT THE SAME TIME
Suction systems are part of the basic equipment of every dental practice. Without them, everyday work would not be possible. METASYS solutions meet the highest demands and the stringent requirements that suction systems have to fulfil. A uniformly strong suction rate can be guaranteed even during continuous use and high material strain.
CHOOSE THE SUITABLE MODEL FROM OUR BROAD PRODUCT RANGE:
- EXCOM hybrid: Central dry AND semi-wet suction systems
- Single unit dry suction VAC: Ready-to-use, powerful dry suction system, complete with a condensate separator and control box
With the EXCOM hybrid, METASYS offers an absolute novelty: Dry and semi-wet suction technology is now combined in one device. The differentiation between dry and semi-wet suction is no longer necessary – one suction system is used for dry and/or semi-wet suction. Innovative design, powerful suction and reliable function: This characterizes the central suction systems EXCOM hybrid. In combination with the METASYS ZPA parallel connection system, up to 15 treatment units
CENTRAL DRY AND SEMI-WET SUCTION SYSTEM FOR 1 DENTAL UNIT
The suction power of dry suction motors, combined with integrated air/water separation and different, optional amalgam separator modules are the cornerstones of a central suction system, marked by its flexible and individual structure, high level of user-friendliness, and its unobtrusive yet efficient technology. The fact that the EXCOM hybrid can be used as a dry as well as a semi-wet suction system makes it so unique.
Metasys EXCOM Z-ECO Light
FLEXIBLE AND INDIVIDUAL AT THE SAME TIME
Suction systems are part of the basic equipment of every dental practice. Without them, everyday work would not be possible. METASYS solutions meet the highest demands and the stringent requirements that suction systems have to fulfil. A uniformly strong suction rate can be guaranteed even during continuous use and high material strain.
CHOOSE THE SUITABLE MODEL FROM OUR BROAD PRODUCT RANGE:
- EXCOM hybrid: Central dry AND semi-wet suction systems
- Single unit dry suction VAC: Ready-to-use, powerful dry suction system, complete with a condensate separator and control box
With the EXCOM hybrid, METASYS offers an absolute novelty: Dry and semi-wet suction technology is now combined in one device. The differentiation between dry and semi-wet suction is no longer necessary – one suction system is used for dry and/or semi-wet suction. Innovative design, powerful suction and reliable function: This characterizes the central suction systems EXCOM hybrid. In combination with the METASYS ZPA parallel connection system, up to 15 treatment units can be supplied with vacuum.
CENTRAL SEMI-WET SUCTION SYSTEM FOR 1 DENTAL UNIT
The suction power of this dry suction motors, combined with integrated air/water separation are the cornerstones of a central suction system, marked by its flexible and individual structure, high level of user-friendliness, and its unobtrusive yet efficient technology.
Metasys EXCOM hybrid 2-A2
FLEXIBLE AND INDIVIDUAL AT THE SAME TIME
Suction systems are part of the basic equipment of every dental practice. Without them, everyday work would not be possible. METASYS solutions meet the highest demands and the stringent requirements that suction systems have to fulfil. A uniformly strong suction rate can be guaranteed even during continuous use and high material strain.
CHOOSE THE SUITABLE MODEL FROM OUR BROAD PRODUCT RANGE:
- EXCOM hybrid: Central dry AND semi-wet suction systems
- Single unit dry suction VAC: Ready-to-use, powerful dry suction system, complete with a condensate separator and control box
With the EXCOM hybrid, METASYS offers an absolute novelty: Dry and semi-wet suction technology is now combined in one device. The differentiation between dry and semi-wet suction is no longer necessary – one suction system is used for dry and/or semi-wet suction. Innovative design, powerful suction and reliable function: This characterizes the central suction systems EXCOM hybrid. In combination with the METASYS ZPA parallel connection system, up to 15 treatment units can be supplied with vacuum.
CENTRAL DRY AND SEMI-WET SUCTION SYSTEM FOR UP TO 3 DENTAL UNITS
The suction power of dry suction motors, combined with integrated air/water separation and different, optional amalgam separator modules are the cornerstones of a central suction system, marked by its flexible and individual structure, high level of user-friendliness, and its unobtrusive yet efficient technology. The fact that the EXCOM hybrid can be used as a dry as well as a semi-wet suction system makes it so unique.
Metasys EXCOM hybrid 5-A5
FLEXIBLE AND INDIVIDUAL AT THE SAME TIME
Suction systems are part of the basic equipment of every dental practice. Without them, everyday work would not be possible. METASYS solutions meet the highest demands and the stringent requirements that suction systems have to fulfil. A uniformly strong suction rate can be guaranteed even during continuous use and high material strain.
CHOOSE THE SUITABLE MODEL FROM OUR BROAD PRODUCT RANGE:
- EXCOM hybrid: Central dry AND semi-wet suction systems
- Single unit dry suction VAC: Ready-to-use, powerful dry suction system, complete with a condensate separator and control box
With the EXCOM hybrid, METASYS offers an absolute novelty: Dry and semi-wet suction technology is now combined in one device. The differentiation between dry and semi-wet suction is no longer necessary – one suction system is used for dry and/or semi-wet suction. Innovative design, powerful suction and reliable function: This characterizes the central suction systems EXCOM hybrid. In combination with the METASYS ZPA parallel connection system, up to 15 treatment units can be supplied with vacuum.
CENTRAL DRY AND SEMI-WET SUCTION SYSTEM FOR UP TO 5 DENTAL UNITS
The suction power of dry suction motors, combined with integrated air/water separation and different, optional amalgam separator modules are the cornerstones of a central suction system, marked by its flexible and individual structure, high level of user-friendliness, and its unobtrusive yet efficient technology. The fact that the EXCOM hybrid can be used as a dry as well as a semi-wet suction system makes it so unique.
Metasys VAC I Light
FLEXIBLE AND INDIVIDUAL AT THE SAME TIME
Suction systems are part of the basic equipment of every dental practice. Without them, everyday work would not be possible. METASYS solutions meet the highest demands and the stringent requirements that suction systems have to fulfill. A uniformly strong suction rate can be guaranteed even during continuous use and high material strain.
CHOOSE THE SUITABLE MODEL FROM OUR BROAD PRODUCT RANGE:
- EXCOM hybrid: Central dry AND semi-wet suction systems
- Single unit dry suction VAC: Ready-to-use, powerful dry suction system, complete with a condensate separator and control box
With the EXCOM hybrid, METASYS offers an absolute novelty: Dry and semi-wet suction technology is now combined in one device. The differentiation between dry and semi-wet suction is no longer necessary – one suction system is used for dry and/or semi-wet suction. Innovative design, powerful suction and reliable function: This characterizes the central suction systems EXCOM hybrid. In combination with the METASYS ZPA parallel connection system, up to 15 treatment units can be supplied with vacuum.
SINGLE-UNIT DRY SUCTION SYSTEM
VAC I Light dry suction systems are equipped with condensate separators to prevent condensation water from forming, and with ventilation filters to reduce the spread of germs. METASYS dry suction systems also have an air flow valve. This protects the motor from overheating, thus ensuring consistently high vacuum. The control box supplied with the appliance can be attached to the suction contacts. A fitting covering hood is available separately in order to reduce the noise level even further.
Metasys Covers for Suction Systems
FLEXIBLE AND INDIVIDUAL AT THE SAME TIME
Suction systems are part of the basic equipment of every dental practice. Without them, everyday work would not be possible. METASYS solutions meet the highest demands and the stringent requirements that suction systems have to fulfill. A uniformly strong suction rate can be guaranteed even during continuous use and high material strain.
CHOOSE THE SUITABLE MODEL FROM OUR BROAD PRODUCT RANGE:
- EXCOM hybrid: Central dry AND semi-wet suction systems
- Single unit dry suction VAC: Ready-to-use, powerful dry suction system, complete with a condensate separator and control box
With the EXCOM hybrid, METASYS offers an absolute novelty: Dry and semi-wet suction technology is now combined in one device. The differentiation between dry and semi-wet suction is no longer necessary – one suction system is used for dry and/or semi-wet suction. Innovative design, powerful suction and reliable function: This characterizes the central suction systems EXCOM hybrid. In combination with the METASYS ZPA parallel connection system, up to 15 treatment units can be supplied with vacuum.
ROBUST AND QUIET
Designed in neutral white and equipped with special noise insulation material, the METASYS covering hoods not only meet high aesthetic demands but also reduce suction noises to a minimum. Please refer to our brochure for an overview of suitable covering hoods.